Materials Engineering and Testing

Construction Testing Services can help you on your next project with our Material Testing services. Reach out today to learn more about our Material Testing services.

Concrete/Cement

  • ASTM C39 Compressive Strength of Cylindrical Concrete Specimens (6×12)
  • ASTM C39 Compressive Strength of Cylindrical Concrete Specimens (4×8)
  • ASTM C39 Compressive Strength of Cylindrical Concrete Specimens (over 8000 psi)
  • ASTM C39 Compressive Strength of Cylindrical Concrete Specimens (over 10000 psi)
  • ASTM C495 Compressive Strength of Lightweight Insulating Concrete
  • ASTM C42 Obtaining and Testing Sawed Beams and Drilled Cores of Concrete (cores)
  • ASTM C1550 Flexural Toughness of Fiber Reinforced Concrete (Round Panel
  • ASTM C78 Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
  • ASTM C157 Length Change of Hardened Hydraulic-Cement Mortar and Concrete
  • ACI 506, ASTM C42 and C1140 Shotcrete Nozzleman Qualification
  • ACI 506, ASTM C42 and C1140 Shotcrete Pre-Qualification Cores
  • ASTM C1140 Shotcrete Production Cores
  • AASHTO T336 Coefficient of Thermal Expansion
  • ASTM C567 Determining Density of Structural Lightweight Concrete (Cylinders)
  • ASTM C685 Standard Specification for Concrete made by Volumetric Batching and Mixing
  • Cement Quality Sampling
    Physical Testing of Gypsum, Gypsum Plasters and Gypsum
    Concrete ASTM C472
  • Splitting Tensile Strength of Cylindrical Concrete Specimens
    ASTM C496
  • Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression ASTM C469
  • Density of Hydraulic Cement ASTM C188
  • Testing of Controlled Low Strength Material (CLSM) Test Cylinders ASTM D4832
  • GFRC Pull Test PCI
  • GFRC Flexural Test PCI
  • Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam (Cell-Crete) ASTM C796

Masonry

  • ASTM C1019 Compressive Testing of Grout (Masonry)
  • ASTM C109 Compressive Strength of Hydraulic Cement Mortars Using 2″ Cube Specimens
  • ASTM C1314 Compressive Strength of Masonry Prisms
    CBC 2105A.4 Testing Concrete Masonry Units and Related Units (Core Compression)
  • ASTM C780 A7.6 Compressive Strength of Molded Masonry Mortar Cylinders and Cubes (2″ Sample)
  • ASTM C140 Testing Concrete Masonry Units (CMU) and Related Units (Full Unit)
  • ASTM C426 Linear Drying Shrinkage of Concrete Masonry Units (Per Unit)
    Masonry Core Shear Testing
  • ASTM C140 Testing Concrete Masonry Units (Absorption, Moisture Content, Unit Weight)
  • ASTM C67 Brick and Clay Tile (modulus of rupture, compression, saturation coefficient, suction rate, efflorescence)
  • Mortar or Grout, Stored and Cured, Not Tested (including molds)

Aggregates (Soils & Concrete)

  • ASTM C136 Determining Sieve Analysis of Fine and Coarse Aggregates (Coarse Only)
  • ASTM C136 Sieve Analysis of Fine and Coarse Aggregates (Fine Only)
  • ASTM C117 Sieve Analysis of Fine and Coarse Aggregates (Wash Included)
  • ASTM C117 Sieve Analysis of Fine and Coarse Aggregates (200 Wash Only)
    Evaluating Cleanness of Coarse Aggregate
  • ASTM C88 Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
  • Unit Weight of Aggregate
  • ASTM C142 Clay Lumps and Friable Particles in Aggregates
  • ASTM D4791 Flat Particles, Elongated Particles or Flat and Elongated Particles in Coarse Aggregate
  • ASTM C40 Organic Impurities in Fine Aggregates for Concrete
  • ASTM C127 Density, Relative Density(Specific Gravity), and Absorption of Coarse Aggregate
  • ASTM C128 Density, Relative Density(Specific Gravity), and Absorption of Fine Aggregate
  • ASTM D5821 Percentage of Crushed Particles/Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
  • ASTM C1252/AASHTO T304A Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
  • ASTM D2419 Sand Equivalent Value of Soils and Fine Aggregate
  • ASTM D3744 Flakiness Index of Coarse Aggregate
    Durability Index (Fine)
  • ASTM D3744 Durability Index (Coarse)
  • ASTM D3744 Durability Index (Fine and Coarse)
  • ASTM C123/AASHTO T113 Lightweight Particles in Aggregate
    CRD-C169 Resistance of Rock to Wetting and Drying

Asphalt

  • ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures (Solvent)
  • ASTM 6816 Determining Low Temperature Performance Grade (PG) of Asphalt Binders
  • ASTM D3549 Thickness/Height of Compacted Bituminous Paving Mixture Specimens (Cores)
  • ASTM D6926/ AZ AZ 416 Method of Prep of Bituminous Mixture Test Specimens
  • ASTM D1188 and D2726/AZ 415 Bulk Specific Gravity and Density of Compacted Bituminous Mixtures (LTMD)
  • ASTM D6931 Indirect Tensile (IDT) Strength of Bituminous Mixtures (TSR)
  • ASTM D5444 Mechanical Size Analysis (Coarse and Fine) of Extracted Aggregate
  • ASTM D6927 Marshall Stability and Flow of Bituminous Mixtures
  • ASTM D2041/AZ 417 Theoretical Maximum Specific Gravity and Density (Rice)
  • Measuring the Permeability of Bituminous Pavements and Seal Coats
  • Swell of Bituminous Mixtures
  • ASTM D1461 Moisture Vapor Susceptibility of Bituminous Mixtures/Moisture or Volatile Distillates in Asphalt
  • Stabilometer Value
  • ASTM D6307/AZ 427 Determination of Asphalt Content of Bituminous Paving Mixtures by the Ignition Method
  • ASTM D6307 Determination of Correction Factor of Bituminous Paving Mixtures by the Ignition Method
  • Determination of Asphalt and Moisture Contents of Bituminous Mixtures by Microwave Oven
  • ASTM D1075 Effect of Water on Compressive Strength of Compacted Bituminous Mixtures

Mechanical Testing

  • ASTM A370 Mechanical Testing of Steel Products (General Tensile)
  • AWS B4.0 Fillet Weld Break Test for Qualification (Welding)
  • ASTM E8, B557 and AWS B4.0 Tension Testing of Metallic Materials, Tension Testing Wrought and Cast Aluminum and Magnesium-Alloy Products, (Welding Coupon Tensile)
  • ASTM A370 Mechanical Testing of Steel Products (Couplers)
  • ASTM E2248 and ASTM E23 Impact Testing of Miniaturized Charpy V-Notch Specimens, Notched Bar Impact Testing of Metallic Materials
  • ASTM A751 Testing, Practices, and Terminology for Chemical Analysis of Steel Products
  • ASTM A370 and E290 Mechanical Testing of Steel Products & Bend Testing of Material for Ductility; #3-#8
  • ASTM A370 and E290 Mechanical Testing of Steel Products & Bend Testing of Material for Ductility; #9-#11
  • ASTM A370 and E290 Mechanical Testing of Steel Products & Bend Testing of Material for Ductility; #14+
  • ASTM A370, A82 and A185 Mechanical Testing of Steel Products, Standard Specification for Steel Wire, Plain, for Concrete Reinforcement
  • ASTM E190 and AWS B4.0 Guided Bend Test for Ductility of Welds, Mechanical Testing of Welds
  • ASTM F307, F1554 and F606 Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Anchor Bolts Only (Tension and Yield)
  • ASTM E18 Rockwell Hardness of Metallic Materials
  • ASTM A194 or A563 Proof Test for Carbon and Alloy Steel (Nuts Only)
  • ASTM E94, E1030 and E1032 Radiographic Examination of Metallic Castings/Weldments
  • ASTM E340, E381 and AWS Macroetching Metals and Alloys
  • ASTM F606 Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (HSB Assemblies)
  • ASTM A370 Mechanical Testing of Steel Products (Terminators Tensile)
  • ASTM D4884 Strength for Sewn or Bonded Seams of Geotextiles
  • ASTM D2261 Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure
  • ASTM D5034 Breaking Strength and Elongation of Textile Fabrics (Grab Test)
  • ASTM D3039 Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
  • ASTM A416 and A1061 Steel Strand, Uncoated Seven-Wire for Prestressed Concrete

Contact Us Today

6 + 14 =